| 1: |
Order steel for front and rear frame |
 | Complete |
| 2: |
Cut steel for front and rear frame |
| Complete |
| 3: |
Assemble and weld steel for front and rear frame |
| Complete |
| 4: |
Send CAD files for laser cutting for articulated steering components. |
| Complete |
| 5: |
Laser cutting for articulated steering components |
| Complete |
| 6: |
Assemble and weld articulated steering components |
| Complete |
| 7: |
Order bearings for articulated steering and assemble. |
| Complete |
| 8: |
Lathe and thread articulated steering pivot pin |
| Complete |
| 9: |
Spec and order hydraulic motors for drive wheels. |
| Complete |
| 10: |
Spec and order rims and wheels and have mounted. |
| Complete |
| 11: |
Order steel for front and rear suspension |
| Complete |
| 12: |
Cut and assemble and weld front suspension components |
| Complete |
| 13: |
Order Polyethylene (UHMW) Plastic for custom bushings |
| Complete |
| 14: |
Lathe Polyethylene (UHMW) Plastic for front and rear suspension bushings and thrust bushings. |
| Complete |
| 15: |
Lathe front suspension shaft and thread ends. |
| Complete |
| 16: |
Lathe front and rear suspension End Caps |
| Complete |
| 17: |
Send CAD file for fold up ramp to Ross Machine for fabrication. |
| Complete |
| 18: |
Slight modifications are required on the ramp to make fit properly. |
| Complete |
| 19: |
Assemble Wheels on front and rear suspension for proper fit. |
| Complete |
| 20: |
Order Steel for front suspension guides. |
| Complete |
| 21: |
Order Polyethylene (UHMW) Plastic for front suspension guides. |
| Complete |
| 22: |
Cut and assemble Steel and Polyethylene (UHMW) Plastic for front suspension guides. |
| Complete |
| 23: |
Order materials for upper shock bracket on front suspension |
| Complete |
| 24: |
Send front frame to Ross machine shop to have aluminum floor and sides installed. |
| Complete |
| 25: |
Cut and weld upper shock brackets for front suspension |
| Complete |
| 26: |
Cut and assemble and weld rear suspension components. |
| Complete |
| 27: |
Order Polyethylene (UHMW) Plastic for Articulated Steering Bushings. |
| Complete |
| 28: |
Send (UHMW) Plastic for Articulated Steering Bushings to Ross machine shop for fabrication. |
| Complete |
| 29: |
Mount and weld front suspension slide track to frame. |
| Complete |
| 30: |
Weld front suspension guide Finn on. |
| Complete |
| 31: |
Cut vertical frame supports for upper shock brackets on the frame. |
| Complete |
| 32: |
Add vertical frame supports for upper shock brackets on the frame. |
| Complete |
| 33: |
Order Ride tech air suspension shocks for front suspension and lowering system. |
| Complete |
| 34: |
Resize ramp to fit frame better. |
| Complete |
| 35: |
Design and machine hinges for fold up ramp. |
| Complete |
| 36: |
Order external snap rings for upper suspension pin. (.588 ID) |
| Complete |
| 37: |
Machine custom upper suspension spacers for shocks. |
| Complete |
| 38: |
Tweak right front suspension slide track for smoother operation. |
| Complete |
| 39: |
Tweak inner frame for aluminum insert to fit better. |
| Complete |
| 40: |
Floor support brackets to be cut and welded in. |
| Complete |
| 41: |
Get articulated steering cylinder brackets fabricated. |
| Complete |
| 42: |
Get final specs for hydraulic system. |
| Complete |
| 43: |
Send machine to Ross to fabricate fuel tank and oil reservoir. |
| Complete |
| 44: |
Fabricate rollover protection bar, and welded onto the machine. |
| Complete |
| 45: |
Order and pick up hydraulic components for mockup. |
| Complete |
| 46: |
Design and fabricate steering sensor. |
| Complete |
| 47: |
Mount tanks and install brackets. |
| Complete |
| 48: |
Lathe front suspension shaft in the center to reduce diameter for easier install. |
| Complete |
| 49: |
Finish designing throttle actuator linkage. |
 | Incomplete |
| 50: |
Design ramp sensor brackets. |
| Incomplete |
| 51: |
Design Control box for joystick and LCD screen. |
| Incomplete |
| 52: |
Have joystick control box 3D printed. |
| Incomplete |
| 53: |
Send machine into finish rollbar protection fabrication. |
| Incomplete |
| 54: |
Mount fuel filler on fuel tank. |
| Incomplete |
| 55: |
Fabricate articulated steering seal for shaft front |
| Incomplete |
| 56: |
Tweak pneumatic cylinders spring return on ramp for smoother lowering. |
| Incomplete |
| 57: |
Send machine to Ross to fabricate fenders. |
| Incomplete |